| Customization: | Available |
|---|---|
| CAS No.: | 834-12-8 |
| Formula: | C9h17n5s |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product | Ametryn |
| Solubility | The solubility in water is 185mg/L (20ºC). Soluble in organic solvents. |
| Specification | 95%TC,80%WP |
| Function | Herbicide |
| Suitable crop | Corn, sugar cane, pineapple, banana, cotton, citrus, etc. |
It can inhibit photosynthesis of plants and is a selective herbicide. The herbicidal effect is rapid, and it can be adsorbed by 0-5 cm soil to form a drug layer, so that weeds can contact the agent when they sprout. It has the best control effect on budding weeds. It is used to control annual field weeds such as Matang and setaria in corn and sugarcane fields.
| Application | Selective suction-conducting herbicide. It is a typical photosynthetic inhibitor. It is used to control annual weeds in sugarcane, citrus, corn, soybean, potato, pea and carrot fields. High doses can control some perennial weeds as well as aquatic weeds. For spring sugarcane field, 80% wettable powder 1.95 ~ 3kg/hm2 (effective composition 1.56 ~ 2.4kg), 600 ~ 750kg of water for stem and leaf spray treatment. For the autumn sugarcane field, 80% wettable powder 1.05 ~ 1.95kg/hm2 (effective composition 0.84 ~ 1.56kg), water 600 ~ 750kg at the 3 leaf stage of weeds spray. Other crops can be used for pre-seedling soil treatment or post-seedling stem and leaf treatment. Atrazine in low concentration can promote plant growth, stimulate the growth of buds and roots, promote the increase of leaf area, stem thickening and so on. However, in high concentrations, it will have a strong inhibitory effect on plants. For the control of bananas, citrus, coffee, sugarcane, tea and non-arable broad-leaved and gramineous hetero-selective herbicides, before and after seedlings, bananas, citrus, coffee, cocoa, corn, oil palm, bromeliad, sugarcane, tea, potato and non-arable broad-leaved and gramineous weeds. |
| Usage method | 1. After seeding and before seedling application, 80% atrazine should be applied to 130-200 grams per mu (effective ingredient 104-160 grams) after planting and before seedling emergence. Soil texture viscosity reuse high dose, soil texture loose with low dose. The spray volume is 40 ~ 60 liters per mu. After seedling, the medicine was applied in the 3 ~ 4 leaf stage of sugarcane. The best application period is when most weeds emerge and the weed plant height is 10-20 cm. The spray volume is 30 ~ 50 liters per mu. While atrazine is safe for sugarcane with more than 4 leaves, try to avoid direct spraying. After the seedling, the spray nozzle is aligned to the furrow, and the spray nozzle is lowered for directional spraying. In the sugarcane fields where Barnyard grass, Qianjin, Shenghongthistle, field convularia, hollow lotus seed and dogtooth root are more harmful, it is best to apply the medicine before seedling. Mixed with Atrazine or 2 methyl4 chloride can expand the herbicidal spectrum and improve the efficacy, 80% atrazine 70 ~ 80 grams (active ingredient 56 ~ 64 grams) and 80% atrazine 70 ~ 80 grams (active ingredient 56 ~ 64 grams) per mu, or 56% 2-methyl4 chloride 50 grams (active ingredient 28 grams). The addition of 0.5% surfactant in the liquid after application is beneficial to the effect. 2. Pineapple field after harvest or before planting, before weed seedling medication. Use 80% atrazine wettable powder 130-260 grams per mu (effective ingredient 104-208 grams), add water 30-50 liters of spray. If sprayed once every 1 to 2 months, the amount is 1/4 or 1/2 of the conventional amount (260 grams/mu), directional spraying can keep the field free of weeds. 3. Banana field transplantation or other time before and after seedlings, with 80% atamex wettable powder 75 ~ 330 grams per mu (effective ingredient 60 ~ 264 grams), add water 30 ~ 50 liters of spray. The interval of repeated application was 3 ~ 4 months. The maximum dosage in one year is 1.7 kg per mu (1360 grams of active ingredient). 4. Atrazine in potato fields can be used as a desiccant for mature potato vines. Generally, 70 ~ 150 grams of 80% atrazine wettable powder (active ingredient 56 ~ 120 grams) is used per mu, and 66 liters of spray liquid is used. Spray should be done carefully. The drying time is 10 to 14 days. Drying time increased at low temperatures. At the same time, it can also treat weeds at seedling stage in the field. The solution was prepared by secondary dilution method. Pour the required amount of medicine into the container, add a small amount of water to stir into a paste, slowly pour the paste liquid into the medicine cabinet containing a certain amount of water, stir while pouring, and then add the water to the required amount. In order to increase atrazine activity, rainfall and irrigation are key, so the drug should be applied during the rainy season or before irrigation. |
| Attention | 1. When applying the drug, it should prevent drifting to neighboring crops. 2. Sandy soil with low organic matter content should not be used. 3. Plots that have been applied with atrazine should not be planted with atrazine-sensitive crops for one year. 4. This product should be stored in a cool and dry place. Stay away from fertilizers, other pesticides, seeds, food, feed. 5. Avoid contact with skin and eyes. 6. This product is used for pre-seedling soil spray treatment, maximum once per season. 7. This product can not be mixed with other pesticides without testing. 8. Wear necessary protective equipment when applying the pesticide, try to avoid skin contact with the pesticide, apply the pesticide downwind, avoid applying the pesticide upwind, wash the face, hands and bare skin and clothing with soap after application, do not smoke or eat or drink when applying the pesticide. 9. The remaining liquid medicine should be properly disposed of, and it is prohibited to pour into the pond to avoid the impact on the water source and fish. |
1. We have a professional and efficient team that can meet your various needs.
2. Have rich knowledge and sales experience in chemical products, and have in-depth research on the use of products and how to maximize their effects.
3. The system is sound, from supply to production, packaging, quality inspection, after-sales, and from quality to service to ensure customer satisfaction.
4. Price advantage. On the premise of ensuring quality, we will give you the best price to help maximize customers' interests.
5. Transportation advantages, air, sea, land, express, all have dedicated agents to take care of it. No matter what transportation method you want to take, we can do it.
Before shipping: Send the estimated shipping time, estimated arrival time, shipping advice, and shipping photos to the customer in advance.
During transportation: Update tracking information timely.
Arrival at destination: Contact the customer after the goods arrive at the destination.
After receiving the goods: Track customer's goods packaging and quality.
1. Can I get samples?
Of course, we provide our customers free samples, but you need to pay the shipping cost on your own.
2. What are the payment terms?
For payment terms, we accept Bank Account, West Union, L/C, T/T, D/P and so on.
3. How about the packaging?
We provide the usual types of packages for our customers. If you need, we can also customize packages as you required.
4. How about the shipping costs?
We provide air, sea and land transportation. According to your order, we will choose the best way to transport your goods. Shipping costs may vary because of the different shipping ways.
5. What are the delivery time?
We will arrange production immediately as soon as we accept your deposit. For small orders, the delivery time is approximately 3-7 days. For large orders, we will start production as soon as possible after the contract is signed, the appearance of the product is confirmed, the packaging is made and your approval is obtained.
6. Do you have the after-sales service?
Yes, we have. We have seven systems to guarantee your goods produce smoothly. We have Supply System, Production Management System, QC System, Packaging System, Inventory System, Inspection System Before Delivery and After-Sales System. All of them are applied to ensure your goods arriving at your destination safely. If you have any questions, please feel free to contact us.
){kind=link}